Robins Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

402nd CMXG large 5-axis milling system arrives

ROBINS AIR FORCE BASE, Ga. – Contractors shimmy a large 5-axis computerized numerical control machine into place with forklifts inside building 140 at Robins Air Force Base, Georgia, Feb. 9, 2021. The 402nd Commodities Maintenance Group had to dig up and strengthen the floor to support the 158,757 pounds 5-axis milling system. (U.S. Air Force photo by Joseph Mather)

Details Download

CMXG: Non-Destructive inspection testing keep aircraft flying an

ROBINS AIR FORCE BASE, Ga. -- Josh Gilley, 571st Commodities Maintenance Group Non-Destructive tester inspector with the Warner Robins Air Logistics Complex, uses an eddy current rotary unit to identify possible cracks or weaknesses on an F-15 aircraft wing at Robins Air Force Base, Georgia, Feb. 10, 2020. The NDI team provides this information to engineers and maintenance workers to make necessary repairs during aircraft depot level maintenance. (U.S. Air Force photo by Joseph Mather)

Details Download

CMXG: Non-Destructive inspection testing keep aircraft flying an

ROBINS AIR FORCE BASE, Ga. -- Josh Gilley, 571st Commodities Maintenance Group Non-Destructive tester inspector with the Warner Robins Air Logistics Complex, documents readings from an eddy current rotary unit on an F-15 aircraft wing at Robins Air Force Base, Georgia, Feb. 10, 2020. The NDI team provides this information to engineers and maintenance workers to make necessary repairs during aircraft depot level maintenance. (U.S. Air Force photo by Joseph Mather)

Details Download

CMXG: Non-Destructive inspection testing keep aircraft flying an

ROBINS AIR FORCE BASE, Ga. -- Josh Gilley, 571st Commodities Maintenance Group Non-Destructive tester inspector with the Warner Robins Air Logistics Complex, prepares his test equipment for inspecting screw holes on an F-15 aircraft wing at Robins Air Force Base, Georgia, Feb. 10, 2020. Each item inspected is tracked with each aircraft that receives depot level maintenance. (U.S. Air Force photo by Joseph Mather)

Details Download

CMXG: Non-Destructive inspection testing keep aircraft flying an

ROBINS AIR FORCE BASE, Ga. -- Josh Gilley, 571st Commodities Maintenance Group Non-Destructive tester inspector with the Warner Robins Air Logistics Complex, inspects dozens of holes with an eddy current rotary unit on an F-15 aircraft wing at Robins Air Force Base, Georgia, Feb. 10, 2020. The NDI Team with CMXG is responsible for identifying possible weakness and cracks on a variety of aircraft parts so engineers and maintenance workers can make necessary repairs during aircraft depot level maintenance. (U.S. Air Force photo by Joseph Mather)

Details Download

Metrology and Additive Manufacturing Lab ensures quality

ROBINS AIR FORCE BASE, Ga. -- Tracy Rycroft, 402nd Commodities Maintenance Group mechanical engineering technician with the Metrology and Additive Manufacturing Lab, reviews a 3D Computer-Aided Model at Robins Air Force Base, Georgia, Feb. 10, 2021. The 3D CAD model will be used to design a mold that will be 3D printed and then used by the plastic shop to re-create parts for the C-5 aircraft. (U.S. Air Force photo by Joseph Mather)

Details Download

CMXG: Non-Destructive inspection testing keep aircraft flying an

ROBINS AIR FORCE BASE, Ga. -- Josh Gilley, 571st Commodities Maintenance Group Non-Destructive tester inspector with the Warner Robins Air Logistics Complex, documents readings from more than a hundred holes with eddy current rotary unit on an F-15 aircraft wing at Robins Air Force Base, Georgia, Feb. 10, 2020. The NDI team provides this information to engineers and maintenance workers to make necessary repairs during aircraft depot level maintenance. (U.S. Air Force photo by Joseph Mather)

Details Download

Bioenvironmental Engineering 'jack of all trades'

ROBINS AIR FORCE BASE, Ga. – Airman Taegan Thomas, 78th Bioenvironmental journeyman, prepares to perform a mask fit test at Robins Air Force Base, Georgia, Feb. 9, 2021. Workers are exposed to a variety of irritants to make sure the masks are working properly. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

402nd CMXG large 5-axis milling system arrives

ROBINS AIR FORCE BASE, Ga. – Contractors unload the first of eight tractor trailers containing the pieces of a large 5-axis computerized numerical control machine outside building 140 at Robins Air Force Base, Georgia, Feb. 9, 2021. The arrival of the large milling machine to the 402nd Commodities Maintenance Group is the culmination of more than eight years of planning and valued at over $48 million. (U.S. Air Force photo by Joseph Mather)

Details Download

402nd CMXG large 5-axis milling system arrives

ROBINS AIR FORCE BASE, Ga. – Contractors maneuver a large 5-axis computerized numerical control machine around a corner inside building 140 at Robins Air Force Base, Georgia, Feb. 9, 2021. Workers from the 402nd Commodities Maintenance Group had to clear space along the aisle to make room for the large machine. (Courtesy photo)

Details Download

402nd CMXG large 5-axis milling system arrives

ROBINS AIR FORCE BASE, Ga. – Contractors tow a large 5-axis computerized numerical control machine into the 402nd Commodities Maintenance Group building at Robins Air Force Base, Georgia, Feb. 9, 2021. This is the third of six 5-axis milling machines to arrive at building 140, with another three arriving throughout 2021. (U.S. Air Force photo by Joseph Mather)

Details Download

402nd CMXG large 5-axis milling system arrives

ROBINS AIR FORCE BASE, Ga. – Contractors unwrap a large 5-axis computerized numerical control machine outside a 402nd Commodities Maintenance Group building at Robins Air Force Base, Georgia, Feb. 9, 2021. The large 5-axis machine was wrapped and framed to protect it from the elements during its voyage from Japan to the United States, then driven cross country via tractor trailer. (U.S. Air Force photo by Joseph Mather)

Details Download

Bioenvironmental Engineering 'jack of all trades'

ROBINS AIR FORCE BASE, Ga - Elliott Wilkins, 78th Bioenvironmental Health technician prepares to store a pair of respirators following a fit test at Robins Air Force Base, Georgia, Feb. 9, 2021. Wilkins said a proper working mask gives workers confidence while doing their jobs. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Bioenvironmental Engineering 'jack of all trades'

ROBINS AIR FORCE BASE, Ga. – Airman Taegan Thomas, 78th bioenvironmental journeyman, performs a respirator fit test at Robins Air Force Base, Georgia, Feb. 9, 2021. Testers, like Airman Thomas, use an irritant smoke to detect leakage into a respirator or mask. Individuals are asked to perform different movements to make sure the personal protective equipment fits correctly. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Bioenvironmental Engineering 'jack of all trades'

ROBINS AIR FORCE BASE, Ga. – Airman Taegan Thomas, 78th Bioenvironmental journeyman, walks down a line performing a respirator fit test at Robins Air Force Base, Georgia, Feb. 9, 2021. Airman Thomas holds an irritant smoke to each person’s face to detect leakage in the respirators. Throughout the process, individuals are asked to perform different movements to make sure the personal protective equipment fits correctly.(U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Bioenvironmental Engineering 'jack of all trades'

ROBINS AIR FORCE BASE, Ga. – Airman 1st Class Josue David, 78th Bioenvironmental Flight technician, records water chlorine levels in building 905 at Robins Air Force Base, Georgia, Feb. 9, 2021. Testing for contaminants and chlorine levels are among the many industrial hygiene duties the flight performs regularly. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Bioenvironmental Engineering: ‘Jack of all trades’

ROBINS AIR FORCE BASE, Ga. – Airman Brooke DuHart, 78th Bioenvironmental Flight technician, shows fellow technicians, Airman 1st Class Josue David and Airman 1st Class San Flowers, how to conduct a water quality test at Robins Air Force Base, Georgia, Feb. 9, 2021. Testing for contaminants and chlorine levels are among the many industrial hygiene duties the flight performs monthly. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Bioenvironmental Engineering: ‘Jack of all trades’

ROBINS AIR FORCE BASE, Ga - Chadwick Kinser, 78th Bioenvironmental Health technician disinfects a mask following a fit test at Robins Air Force Base, Georgia, Feb. 9, 2021. These mask protect the user from inhaling paint fumes or other hazardous vapors. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

Fun Flight boosts Airmens’ morale

ROBINS AIR FORCE BASE, Ga. – April Harris, Heritage Club manager, prepares Valentine’s Day baskets for club members at Robins Air Force Base, Georgia on Feb. 9, 2021. The club is one of several base facilities supported by the Morale, Welfare and Recreation Fund. (U.S. Air Force photo by Kisha Foster Johnson)

Details Download

New commercial vehicle gate coming to Robins

ROBINS AIR FORCE, Ga. – Contractors tear down building 602 and remove the building’s debris at Robins Air Force Base, Georgia, Feb. 8, 2021. The new commercial access control point construction project, led by the United States Army Corps of Engineers, Savannah District, will add space for commercial vehicles to get in line without backing up traffic on Georgia Highway 247. (U.S. Air Force photo by Joseph Mather)

Details Download