Robins Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

402nd EMXG REARM made new through redesign

ROBINS AIR FORCE BASE, Ga. -- Damon Brown, 402nd Electronic Maintenance Group Reverse Engineering, Avionics Redesign and Manufacturing chief, with the Warner Robins Air Logistics Complex at Robins Air Force Base, Georgia, explains the steps his team took to redesign a circuit board for a B-52 aircraft Sept. 17, 2020. This one board replaces five circuit cards inside the legacy aircraft. (U.S. Air Force photo by Joseph Mather)

Details Download

200827-F-KR180-1001

A prototype fire control radar, used to track threats and pass information to weapons designed to take down the target, is being tested during the Advanced Battle Management Systems Onramp 2 at White Sands Missile Range, N.M., Aug. 27, 2020. The Advanced Battle Management System is an interconnected battle network - the digital architecture or foundation - which collects, processes and shares data relevant to warfighters. (U.S. Air Force photo by Senior Airman Daniel Garcia)

Details Download

Understanding Depression

The National Institute for Mental Health defines depression as a common but serious mood disorder that negatively affects how you feel, think, and handle daily activities such as sleeping, eating, and working.

Details Download

SparkED Team: keeping innovative ideas rolling

Master Sgt. Chad Hardesy, 412th Security Forces Squadron, demonstrates the new Spin scooters near the Airmen dormitories at Edwards Air Force Base, California, during the projects launch Sept. 2. (Air Force photo by Ethan Wagner)

Details Download

AEDC Flight Systems Branch provides data critical to weapon systems development

Ashley Dement, an electrical technician lead, works on a rake used to characterize the flow of the Arnold Engineering Development Complex 16-foot Supersonic Wind Tunnel, March 24, 2020, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

Air Force improves lactation support for nursing mothers

The nursing mother’s room located in the Hartinger building on Peterson Air Force Base, Colorado, also known as Building One and currently home to many U.S. Space Force and U.S. Space Command personnel, is one example of how the Air and Space Forces support working mothers. In August 2019, the DAF released the initial lactation policy, which required commanders to provide nursing mothers with dedicated space in the immediate vicinity of the workplace for the purpose of pumping breastmilk. (U.S. Space Force photo by 2nd Lt. Idalí Beltré Acevedo)

Details Download

Countdown to Digital Air Base Wing

ROBINS AIR FORCE BASE, GA – Tony Toong, a help desk professional with the 78th Communications Directorate, troubleshoots a computer problem for a teleworking base employee at Robins Air Force Base, Georgia, August 14, 2020. Toong is one of 12 technicians working at the First Response Service Center. Back in the spring, call volumes spiked because more people were teleworking due to the COVID-19 pandemic. The need for assistance increased from 150 to 400 daily. (U.S. Air Force photo by Kisha Johnson)

Details Download

200701-F-BD983-0013

U.S. Air Force Basic Military Training trainee, Chris-Ann Wilmoth, 37th Training Wing Detachment 5, Flight 564, participates in a physical training session at Keesler Air Force Base, Miss., July 1, 2020. To continue minimizing close contact among personnel during the ongoing COVID-19 pandemic and ensure units and personnel are fully ready to resume, physical fitness testing has been delayed from October to January 2021. Testing in January will proceed without obtaining waist, height and weight measurements. (U.S. Air Force photo by Kemberly Groue)

Details Download

200701-F-BD983-0013

U.S. Air Force Basic Military Training trainee, Chris-Ann Wilmoth, 37th Training Wing Detachment 5, Flight 564, participates in a physical training session at Keesler Air Force Base, Miss., July 1, 2020. To continue minimizing close contact among personnel during the ongoing COVID-19 pandemic and ensure units and personnel are fully ready to resume, physical fitness testing has been delayed from October to January 2021. Testing in January will proceed without obtaining waist, height and weight measurements. (U.S. Air Force photo by Kemberly Groue)

Details Download

190808-F-KG386-2002

Officer Training School trainees perform sit-ups during an official Air Force Physical Training test, Aug. 8, 2019, Maxwell Air Force Base, Ala. To continue minimizing close contact among personnel during the ongoing COVID-19 pandemic and ensure units and personnel are fully ready to resume, physical fitness testing has been delayed from October to January 2021. Testing in January will proceed without obtaining waist, height and weight measurements. (U.S. Air Force photo by Airman 1st Class Charles Welty)

Details Download

190808-F-KG386-1303

Officer Training School trainees perform sit-ups during an official Air Force Physical Training test, Aug. 8, 2019, Maxwell Air Force Base, Ala. To continue minimizing close contact among personnel during the ongoing COVID-19 pandemic and ensure units and personnel are fully ready to resume, physical fitness testing has been delayed from October to January 2021. Testing in January will proceed without obtaining waist, height and weight measurements. (U.S. Air Force photo by Airman 1st Class Charles Welty)

Details Download

Robins Family Night of HOPE welcomes families to Air Force culture

Robins Integrated Resilience and Prevention Office, along with the base chapel and the Robins Sexual Assault Prevention & Response Office, are teaming up to host Robins Family Night of HOPE on Sept. 25.

Details Download

Meeting Standards: WR-ALC completes modifications to C-17 fleet

The 562nd Aircraft Maintenance Squadron Avionics team at Robins Air Force Base, Georgia, pose with the last C-17 aircraft to receive Automatic Dependent Surveillance Broadcast Out updates mandated by the Federal Aviation Administration Sept. 8, 2020. The Air Force C-17 fleet is complying with the Jan. 1, 2020, FAA mandate to have the ADS-B Out installed on its aircraft.

Details Download

Meeting Standards: WR-ALC completes modifications to C-17 fleet

Guyton Couey, 562nd Aircraft Maintenance Squadron electronics integrated systems mechanic, explains what systems were upgraded in the avionics rack with Automatic Dependent Surveillance Broadcast Out modifications at Robins Air Force Base, Georgia, Sept. 8, 2020. The Air Force C-17 fleet is complying with the Jan. 1, 2020, FAA mandate to have the ADS-B Out installed on its aircraft.

Details Download

Meeting Standards: WR-ALC completes modifications to C-17 fleet

An Altus Air Force Base C-17 aircraft stands ready at Robins Air Force Base, Georgia, Sept. 8, 2020, for a Boeing flight crew to fly the aircraft back to its home station. The aircraft is the last C-17 to receive Automatic Dependent Surveillance Broadcast Out modifications for the Jan. 1, 2020, FAA mandate to have the ADS-B Out installed on its aircraft.

Details Download

402nd Commodities Maintenance Group prepare for six new 5-axis computerized numerical control machines

ROBINS AIR FORCE BASE, Ga. -- A 5-axis machine sits inside building 140 at the Warner Robins Air Logistics Complex and is capable of cutting aluminum in to aircraft parts for the 402nd Commodities Maintenance Group at Robins Air Force Base, Georgia, Sept. 11, 2020. Sections of the floor are being strengthened to support the arrival of six new 5 axis machines. (U.S. Air Force photo by Joseph Mather)

Details Download

402nd Commodities Maintenance Group prepare for six new 5-axis computerized numerical control machines

ROBINS AIR FORCE BASE, Ga. -- Micah Graves, 402nd Commodities Maintenance Group mechanical engineer, shows one of the concrete saws and its diamond tipped blade used to cut sections of the floor inside building 140 at Robins Air Force Base, Georgia, Sept. 11, 2020. A larger saw was needed to achieve the depth required to remove sections of the floor inside building 140 to support one of six new 5-axis aluminum cutting machines. (U.S. Air Force photo by Joseph Mather)

Details Download

402nd Commodities Maintenance Group prepare for six new 5-axis computerized numerical control machines

ROBINS AIR FORCE BASE, Ga. -- Micah Graves, 402nd Commodities Maintenance Group mechanical engineer with the Warner Robins Air Logistics Complex, shows a section of concrete removed from inside building 140 at Robins Air Force Base, Georgia, Sept. 11, 2020. The floor is being replaced and strengthened to support six new 5-axis machines that will be capable of cutting aluminum into aircraft parts. (U.S. Air Force photo by Joseph Mather)

Details Download

402nd Commodities Maintenance Group prepare for six new 5-axis computerized numerical control machines

ROBINS AIR FORCE BASE, Ga. -- Micah Graves, 402nd Commodities Maintenance Group mechanical engineer, opens the door of a large tent inside building 140 at the Warner Robins Air Logistics Complex revealing a construction site making preparations for six new 5-axis aluminum cutting machines at Robins Air Force Base, Georgia, Sept. 11, 2020. The large tent is set up to prevent dust and construction debris from blowing around inside the building. (U.S. Air Force photo by Joseph Mather)

Details Download

78th MSG applies VPP changes to keep personnel safe during pandemic

ROBINS AIR FORCE BASE, Ga. -- An Airman with the 78th Logistics Readiness Squadron at Robins Air Force Base, Georgia, sanitizes the common work areas for viruses like COVID-19 Aug. 19, 2020. As part of the Voluntary Protection Program, squadrons within the 78th Mission Support Group have altered their daily activities to protect their employees and customers in light of the COVID-19 pandemic. (courtesy photo)

Details Download